Dongguan Union Best New Material Technology Co.,LTD

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
Surface Treatment Structure Of Hot Melt Adhesive Sheet
- Sep 26, 2017 -

     The main applications are suitable for bonding of PP, polyethylene and other refractory materials. can also be used for plastic, Jinzhen ceramic, wood, paper, such as bonding or mutual bonding ℃kd-1p type suitable for PP woven bag bonding. The construction craft CKD-1 type will glue heats to the l50~17013, after melts the brushing on the surface which is glued, by the scale if can preheat to the 40~60℃, the bonding effect is better. Close the hot. Pressure above 7kPa. Natural cooling curing, time l~4min.Hot Melt Adhesive Sheet

     Surface treatment: The ground floor must be dry, the floor of the mouth (bump and bad) must be clean, no oil or other dust. Usage: Cut the tip of the bottle, evenly apply glue to the convex tenon or groove in the floor, then fully press the convex tenon into the groove, the extra glue must be wiped off immediately or 5-15 minutes later with a plastic shovel. Note: Should be in the air relative humidity is higher than 75%, the temperature above 5 degrees Celsius environment under construction, do not put the excess plastic liquid into the sewer; This product is suitable for heating floor, but the construction method is different, welcome to obtain relevant information. Spec.: color: White.Hot Melt Adhesive Sheet

     Polymers are multilayered structures of materials, usually chemical constituents of macromolecules, structural unit connections and spatial structures. The properties of hot-melt adhesives are usually related to the different structural levels of the matrix resins. It is related to the first level structure, the macroscopic physical and mechanical properties are more dependent on the higher order structure or the condensed State structure.Hot Melt Adhesive Sheet

      For the same performance resins, crystallization and amorphous, orientation and non orientation, their mechanical properties are also different. For the blends of various polymers that form a hot melt, the influencing factors become more complex and consist of many components.Hot Melt Adhesive Sheet

    Maleic anhydride then Eva and hot-melt adhesive have good adhesion, polar strong hot melt performance and its morphological structure, adhesion, interface layer thickness, dispersed phase size, particle shape and so on the interface between the closely related.Hot Melt Adhesive Sheet