Good Quality Thermoplastic Shoe Toe Puff And Heel Counter Sheet
Advantages: 1. Low activated temperature, eco friendly, recyclable; 2. Good shaping effect, high resilience, good flexibility; 3. Both side bonding 4. good hardness and toughness.
1. Low activated temperature, eco friendly, recyclable;
2. Good shaping effect, high resilience, good flexibility;
3. Both side bonding
4. good hardness and toughness.
Raw material: TPU
Composite fabric: One side nylon mesh cloth+ One side cotton cloth
Thickness: 0.4mm to 2.0mm or as required
Color: White, blue, green, yellow or as required
Activated temperature: 70-80℃
Size: 1M*1.5M/sheet,1Y*1.5M, 40-50yards per roll
1. (MRB) series of low temperature hot melt sheet used with the activation temperature of 70℃—80℃; bonding interface temperature of 70℃—80℃;
2. When use cold / hot stereotypes machine, hot mold temperature should be set to 50°C, maintain 5 seconds (In this case which to ensure that the fabric and temperature can withstand , as far as possible to set high temperature so that both sheet could be fully activated with the fabric and within the melt as a whole, but also can reduce the molding time to improve production speed);
3. If no cold / hot stereotypes machine, directly to the last method of the process, the molding line heating oven temperature should be set at 110°C ~ 120°C, maintain 5 to 10 minutes, so that the film can be fully activated;
1M*1.5M/sheet normally; 500-1000sheet by pallets as required by different thickness;
40&50yards per roll in polybag as required by different thickness
If you are looking for the good quality thermoplastic shoe toe puff and heel counter sheet, welcome to contact our factory for the quality products made in China. We're one of the leading and professional manufacturers and suppliers in China, and we will offer you the quality service and good price.